Newport-brass 280F Bedienungsanleitung PDF herunterladen

Recommended Installation by a Professional Plumbing Contractor

Locate the desired position of slide bar on finished wall. See Fig. 1.

Mark wall and drill 5/16” hole for WALL ANCHORS (2) using WALL BRACKET (1) for hole pat-

tern template.

Due to vibration in shipment, tightening of SETSCREW (7), shown in Fig. 2, may be required

before proceeding to next step.

Check holder orientation prior to installation - o-ring to be full engaged in holder as shown.

Match taper of holder to hose. See Figure 2a.

Place ESCUTCHEON/O-RING (6) onto SLIDE BAR assembly (4) and push forward to expose the

base of end post as shown in Figure 3.

Place SLIDE BAR assembly (4) onto mounted WALL BRACKETS (1) and secure into place with

SETSCREWS (5), three on each end, as shown in Fig. 3.

Slide ESCUTCHEON/O-RING (6) back over end post and flush with finished wall.

Install SUPPLY ELBOW (8) onto exposed 1/2 NPT NIPPLE (9).

Attach one end of HOSE (10) to SUPPLY ELBOW (8) and the other to HAND SHOWER (11).

Place HAND SHOWER (11) onto SLIDE BAR (4) shown in Figure 4 & 5.

35 1/2”

Figure 1

INSTALLATION INSTRUCTIONS

SLIDE BAR ASSEMBLY

MODEL NO. 280E, 280F

Figure 2

Figure 2a

Full o-ring

engagement

Figure 4

Figure 3

Figure 5

(949) 417-5207

NWP-280E Santa Ana, Ca. 92705 10/10/2011

www.brasstech.com

Inhaltsverzeichnis

Seite 1 - MODEL NO. 280E, 280F

Recommended Installation by a Professional Plumbing ContractorLocate the desired position of slide bar on finished wall. See Fig. 1.Mark wall and dril

Kommentare zu diesen Handbüchern

Keine Kommentare

Newport-brass 280F Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Zuhause Newport-brass 280F herunter. Newport Brass 280F User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Zuhause Newport-brass 280F